To purchase HP graphite electrodes for steelmaking, find HP graphite electrode manufacturers. With ten years of steel processing with HP graphite electrode processing technology, quality assurance, the industry has sold tens of thousands of HP graphite electrodes for steelmaking. RS Manufacturer owns mature technology, advanced HP steel graphite electrode equipment, and perfect after-sales service have maintained a good reputation. Free Quote by Email: info@graphelectrode.com .
In electric furnace steelmaking, scrap steel is used as the main raw material, and three-phase alternating current is used as the power source. The electric current is heated and melted by the high temperature of the arc generated between the graphite electrode and the metal material, and is used to produce special steel and high alloy steel. The main method. At present, with the increasingly strict environmental protection, electric steelmaking has also shown a strong competitive situation in the field of general steel.
The HP graphite electrode for steelmaking, as the conductive electrode of the electric furnace steelmaking, plays an important role in the stable operation of the electric furnace steelmaking during the steelmaking process. The graphite electrode in the center of the DC arc furnace is added to the electric furnace as a cathode, and the bottom electrode is an anode. It is composed of two horizontal metals. The metal plate is provided with a gas-conducting cooling fin. Many stylus pins are attached to the metal plate, and magnesia is built between the stylus. filling. The current is introduced into the stylus through the horizontal metal plate at the bottom of the furnace and then passed into the molten pool. In this method, the consumption of the steelmaking electrode is relatively low, only half of the three-phase alternating current arc furnace, and the production cost is low, but the advantages and disadvantages coexist, and the combination of the graphite-magnesia brick is also easy to increase the carbon content.
Therefore, in the steel making process, the electrode oxygen consumption is minimized, the electrode sublimation consumption is reduced, the dissolution and spalling are reduced, the electrode is properly used, the breakage is reduced, and the electrode maintenance is enhanced, and the electrode consumption can be effectively reduced. . At the same time, the application of new processes and new technologies can also reduce their consumption indirectly.
In addition to HP graphite electrode products for steelmaking, Rongsheng also provides anti-oxidation high-power graphite electrodes, metallurgical furnace graphite electrodes, ultra-high power graphite electrodes (UHP), ordinary graphite electrodes (RP), high-power graphite electrodes (HP), UHP/HP400/ 450/550/600 ultra-high power graphite electrode, steelmaking electric furnace graphite electrode, electric arc furnace graphite electrode, EDM graphite electrode for electric discharge machining, etc. If you are looking for the hp graphite electrodes, please contact us. We will give you back as soon as possible!